Boss Zombies

Finally got a re-stock of Boss Zombies this morning. Been a while since these were available so it's good to have them back in the shop. Here are some pics of the set painted by Vesa Makela.

LNOE plastic zombies

At this years Gauntlet event, run by Deeside Defenders,  I picked up a copy of the Last Night on Earth boardgame. I'd known about the game for a while and a big draw for me was all the figures that come with it, 8 survivors and 14 zombies in 3 poses. Here's some pics of the zombies I ended up painting and converting.

The first thing that I noticed about the figures was how bendy they were. These are real soft plastic. Most noticable around the ankles of the figures, very flexy. Now this is a good thing in terms of the figures as un-painted game pieces. You could probably tread on one of these figures and it would spring back into shape, very durable in that respect,  but the flex could cause problems if trying to paint them. Soft plastic can be really tricky to get paint to adhere to, and the flex in the plastic can cause the paint job to crack. Having had some revell 1/72 soft plastics resist every attempt at getting paint to stick to them I didn't hold out much hope.


Still, I'd seen enough decent paintjobs over on Boardgame Geeks for me to do a test on one of the figures to see how durable the paint job was. Just a quick simple job, I also used this figure to try out some blood techniques. As it turned out the paint went on really well.

Because I re-based the figures on coins, to match my metal figures, I tried drilling up into the legs and gluing some wire in place. This really strenghtened the figure, taking away most of the flex. I ended up doing this on the other six figures I plan to paint. Here is the painted figures with the 3 unpainted zombie poses, a the lower profile coin base.

Because there are only 3 poses there is limited variation... but this is where the soft plastic of the figures is a real bonus. The figures are so easy to cut and drill conversions take minutes. I played around with these over the course of a week, and few minutes here and there. I got 6 done and called it a day. The remaining 7 zombies I'll leave unpainted. Here are the six conversions.

These two had an right arm swap and one of the heads was repositioned with bit of wire. Gave the bare-chested guy a t-shirt with some green stuff.

Next two was a torso swap, this worked really well. Repositioned the arms. The zombie with the green body and brown legs is probably my favorite of the conversions.

There is less conversion options with the female since she's the only Z chick, so it was a case of re-positioning arms and twisting the torso around on one of them.... (looks like I need to put a bit more putty on one of the arms..)

All in all in was fun playing around with these, especially since they're so easy to cut and convert... not sure when I'll get a chance to paint them though....

Hoodie Zombie

I finished this last weekend when I was having a break from sculpting. One of my zombies with an attempt at a logo on the hoodie. The logo is 4mm tall on the figure and looks fairly convincing to the eye, but it doesn't fair very well when blown up in a picture. I messed up the stripes on the left arm but covered the mistake in a big blood stain. The letters were damn tricky...  After trying this I'm re-thinking my plans to paint an Iron maiden t-shirt on a zombie...

Tengu Models scale pics

Someone asked about the size of the Son of Yog-Sothoth model when it was posted on TGN so I thought I'd take some scale pics of the model and some other Tengu figures.

Son of Yog-Sothoth assembly.

Here's a quick guide to putting together a Son of Yog Sothoth model. It's pretty easy with some drilling and pinning, and then some filling needed.
Here are the parts in their raw form, two sprues of metal tentacles and the resin body.

First up I took a few minutes to fill in any air bubbles/mould lines that made it to the surface of the body.

Next up tentacles will need to be snipped apart then they're ready for drilling. I found it best to get these all drilled and with the wire glued in place before the next stage. Stuff used pin vice, 1mm drill bit, super glue, wire, and snippers.

Once they were all done with the wire glued in place I was time to start positioning them on the body. It was a case of drilling holes and seeing how the tentacles looked in that position.

At this stage I had all the tentacles glued in position. Being white metal I was able to add more twist and bend to some of them.

Next stage is filling the gap between the metal and the resin body to smooth out the join. Any type of putty can be used for this, I used a 50/50 mix of milliput and green stuff.

Working around the model all gaps were filled and then the putty was left to cure. That was all the modelling done, next up was to wash the model in some soapy water and once it was dry I stuck it to an old paint pot with some blu tack and primed it grey ready for painting.

Return of the Son of Yog-Sothoth

Here's some pics of the new version of my Son of Yog-Sothoth model. The model is based on the H.P.Lovecraft story The Dunwich Horror and represents the horrid result of a union between terrible god Yog-Sothoth and a human female.

I had been producing this kit using RTV rubber and a resin injection casting method but once the first mould wore out I never got around to remaking another one. This time rather than producing the model myself I got a resin caster to make the body and had the tentacles cast in metal. The body had been re-mastered a little from the first run of models, mainly adding eye-lids to the eyes situated around the bulk of the body.

This model will be released as part of my Dark Foam range sometime next week.